My 10-year-old house developed some cosmetic cracks in the mortar. I got some bids to have tuck-pointing work done and nearly gagged when I looked at the cost. I’m wondering about using a special caulk I found that’s made to repair mortar joints. It contains fine sand so it’s textured and the color matches my mortar. I did a test in a small area and am really satisfied with the appearance. It seems too good to be true. Is this the Holy Grail of mortar repair? What could possibly go wrong? — Aaron W., Prosper, Tex.
I’m sorry to hear about the mortar problem. One wonders if these tiny cracks haven’t been there since the day the house was built, especially if the brick was laid during a blistering hot stretch of weather. Hot, windy weather is the worst time to do any masonry or concrete work, as the water leaves the mortar and concrete too fast.
You should be concerned with the small cracks because wind-driven rain readily enters brick walls. It always has, even in old brick buildings constructed decades ago. Old builders and masons knew about this water infiltration and used different types of brick in solid masonry walls.
The inner layers of brick hidden by the outer face brick and the interior wall finishes were made with a softer brick that could absorb lots of water. The water would enter the brick and then go back outside as soon as the storm was over. The sunshine and breeze would suck the water out of the brick walls faster than a tumbleweed skitters across Texas rangeland in a windstorm.
[More Builder: How to avoid a tile-installation disaster in your bathroom — and how to fix one]
Before we discuss your magic caulk discovery, let’s talk about the permanence of brick mortar. What would you say if I told you that your bricklayers could have used a mortar that’s been in use for more than 4,000 years and is still in great condition?
What would you say if this mortar had the ability to heal itself and repair tiny cracks in some cases? I knew you’d be interested. If your bricklayers had used hydrated lime mixed with the sand instead of regular mason’s mortar mix, you’d probably not need this caulk you discovered.
Hydrated lime is a building product that’s rapidly slipping from history to legend to myth, just like the golden ring in Tolkien’s “Lord of the Rings.” I’m doing my best to ensure the wonders of lime mortar continue to live on.
Let’s contrast it to this caulk. I’ve not used it, but I know that no caulk, no matter what it contains, could ever equal the life span of lime mortar. When you mix hydrated lime with water it transforms back into limestone. We all know how long-lasting limestone can be, as many of our federal buildings and monuments are faced with this durable stone. Sand, which is nothing more than tiny pieces of rock, makes up the rest of the mortar.
The chemicals used to make the caulk undoubtedly will succumb to the ultraviolet (UV) rays of the sun. It may take a decade or two, but the sun’s UV rays are so powerful they can break atomic bonds of metals. The sun’s UV rays breaking apart a flexible caulk would be like you trying to tear apart a wet paper towel.
I’d also be concerned about the color fastness of the caulk. It may match your mortar now, but will the color pigments in the caulk be able to withstand the UV rays in two, four or 10 years? If the color does fade, then what do you do?
[More Builder: How to install inexpensive garage shelves]
Another issue with the caulk is it produces a monochromatic color. In other words the caulk, once dry, is one color. Fresh mortar has this same one-color appearance when it’s new because the cement or lime paste is coating the tiny pieces of sand in the mortar.
But Mother Nature wears off this ultrathin paste from the sand in a few years and then you start to see the individual colors of the grains of sand. If the mortar outside your repair area starts to weather more and more, will it soon cease to match the caulk? There are just so many unknowns.
What about long-term adhesion? The caulk may work really well now and develop a tenacious bond with the mortar. What kind of mess might you have on your hands five or 10 years from now if the bond fails?
In all fairness, I’ve seen some very high-quality commercial-grade caulks used to fill expansion joints on large exterior brick walls. Some still is looking good after a decade. Just realize that mortar that’s installed correctly can last hundreds and hundreds of years with no care.
There may be another solution to your problem. You may be able to spray onto the brick and mortar a clear water repellent that’s got a very high solids content. It’s possible the liquid may dry and do a great job of repelling most of the water that you’re worried about.
I can tell you that I’d spend hours and hours researching clear water repellents and doing due diligence to see what other users have experienced. It would be infinitely easier to spray on a liquid than to caulk the thousands of feet of mortar joints on your home. Here’s hoping you’re able to locate that magic liquid, should it exist!
Need an answer? All of Tim’s past columns are archived for free access at www.AsktheBuilder.com. You can also watch hundreds of videos, download Quick Start Guides and more.